太阳成集团tyc539(中国)NO.1有限公司

Comprehensive Status Smart Sensor

WS-CJF-DACSW-112

WS-CJF-DACSW-112 comprehensive status smart sensor detects environmental temperature and humidity, UHF radio wave signals, transient ground voltage pulse signals, ultrasonic vibration frequency signals, etc. to monitor partial discharge defects and temperature and humidity changes inside the switch cabinet. At the same time, it can detect surface discharge, corona discharge, tip discharge, and insulator surface and internal discharge, and comprehensively locate the partial discharge power source.

Main functions and characteristics

1) The sensor structure is highly integrated, small in size, and simple in appearance;

2) Real-time online monitoring, strong anti-interference ability;

3) No maintenance required, operating time can reach 10 years;

4) Support PRPD/PRPS spectrum.

Technical parameter

1、Case

Protection class : IP33
2、Power supply

Power supply : DC5V~36V
Power consumption : ≤1W
3、Communication

Communication method : LoRa/RS-485
Communication protocol : Meets the "Internet of Things Micropower Wireless Network Communication Protocol for Power Transmission and Transformation Equipment" , "Internet of Things Sensor Data Specification for Power Transmission and Transformation Equipment ", and Modbus protocol
Reporting cycle : The reporting period is configurable, the default is 15 minutes
4、Installation method

Strong magnetic adsorption
5、Data collection

50Hz/100Hz correlation, peak value, average value, alarm value, discharge frequency, partial discharge type
6、Measurement

1. TEV detection bandwidth : 3~100MHz
2. TEV detection dynamic range : 0~60dBmV
3. Ultrasonic detection frequency band : 40±1kHz
4. Ultrasonic detection dynamic range : -10~60dBuV
5. Data map : PRPS, cumulative PRPD
6. Power frequency synchronization : Internal sync/wireless sync
7. Sampling frequency : Support adjustable
8. Temperature measurement range : -40C~150℃
9. Temperature measurement accuracy : ±1℃
10. Humidity measurement range : ≤95%RH
11. Humidity measurement accuracy : ±2%RH
7、Working environment

1. Operating temperature : -40℃~85'℃
2. Operating humidity : ≤95%RH
3. Atmospheric pressure : 86kPa~ 106.0kPa

Size Description

Length x width x height :110mm X 130mm X 80mm